Time division of material selection and processing industry for automobile stamping parts

2022-08-01 16:37:26

Car stamping parts play a very important role in the car industry, so when producing such stamping parts, the raw materials are also widely used. Generally, when producing such stamping parts, most of them use the cold stamping process to produce or process. Because the use of cold stamping processing methods in production enterprises can meet the characteristics of many varieties of industrial products and a large number of products produced per unit time. Especially in the era of mechanized large-scale production, the processing method of cold stamping has been widely welcomed in large and small processing enterprises.

In the field of cars, car stamping parts can be seen everywhere. In addition to the cover parts or body panels used in these cars, some load-bearing parts or support parts are made of this material. During this period, the frame, carriage and other large car parts that many people know belong to this field.

Other cold stamping methods can be used to process some materials with hard raw materials. During this period, steel plates and steel strips that are often used in the field of cars can be processed with this equipment. At present, when making stamping parts of cars, less and less steel is used. On the one hand, it is because some raw materials composed of aluminum and carbon elements have stronger hardness, and the use of this composite material can effectively reduce the weight of the car itself. It has a very important effect on the less consumption of gasoline and diesel during the driving of cars. Moreover, after the application of this new composite material, the protection of the car body is more simple.

When using this cold stamping technology to make stamping parts of cars, the quality of products must be dealt with severely. It is assumed that when using this technology to make stamping parts, the production is not carried out according to the requirements, and the workmanship does not meet the standards in the production, so the stamping parts produced are likely to be unqualified in some aspects, and the service life may be shortened in the application, and the car may be in danger during the travel, and the industry or the body of the passengers in the car may be damaged. Other hypotheses are that producing substandard products can cause unnecessary waste to human resources.

Therefore, when selecting materials and processing industries for these car stamping parts, it is not only necessary to carefully select the raw materials used in the processing of these car stamping parts, but also to formulate strict treatment systems in the processing process, and implement relevant inspection rules during the inspection. In this way, the quality problem of this middleware can be controlled from the source.